We are now offeringÂ PremiumÂ Enclosure Services! 20 piece minimum with no setup fees!
*If you need lower quantities, message us for aÂ a quote.*
Color Coatings: Our premium coatings (Cerakote) areÂ superior to powder coatÂ in durability and scratch resistance. These coatings are wildly popular in the automotive and firearm industries for their resilience. We have overÂ 15 colors in stockÂ and growing! If you need a color that we don't have listed we can offer you to pick from our catalog of over 100 colors!
A top coat may be added for a high gloss finish. Most of our coatings are a matte finish and are affordable at $7.50 each piece. A high gloss top coat is available for an additional $7.50 each piece and adds an extra week lead time to fully cure.Â
UV Printing: This printing method is far superior to using water slide decals, vinyl stickers, stamps or sharpies. It will not scratch off easily and does not need a layer of clear coat like most decals. We print graphics anything from monochrome to full color! Our inks are instantly cured by UV light for a solid and permanent adhesion bond to our coated or raw enclosures. We use an industry grade Mimaki printer for the ultimate premium printing service. Our premium UV prints are $7.50 each piece.
A picture proof of one test print is included and will be emailed to you to ensure proper graphic alignment and confirmation before making the permanent graphic. Our printing margin for error is within 1.5mm. If you require additional test prints, they will be treated as billable at $10 each. so please double check your artwork before submitting. Refunds will not be available for printing for artwork that has been approved.
We are currently offering face printing only (no sides.)
If your graphics require additional formatting to be compatible, there will be a $20/hr service fee.Â
Please use the following guidelines when submitting your graphics:
- Canvas size must be the exact size of the enclosure surface being printed
- Leave a margin ofÂ at leastÂ 1.5mm on each side to ensure your graphic does not hang off the edge of the enclosure.
- Image must be vectorized (transparent background)
- Must be a minimum of 300dpi
- All fonts must be converted to shapes (vector)
- Submit your artwork file as .ai